Timing setup is presently: 5 [14ns_FIX_G]
************************************************
This mirrors all block A timing values into
timing block B for efficiency in acqiring
calibration data.
The undo this, you must restart the program.
************************************************
Do you wish to proceed [y/n]? [n]: y
Block A:
BPoffset: 154 bTMD: 8 GD : 914 c0: 738 c1: 730 c2: 722 c3: 729
Block B:
BPoffset: 154 bTMD: 8 GD : 914 c0: 738 c1: 730 c2: 722 c3: 729
Sending parameters...
Prep() function status = 0
--Copying and transferring structure set...
--Initializing command...
--Executing command...
--Waiting for handshake completion...
<ctacf124> CMD_DONE (3)
--Post function loop...
OP TIMING SETUP VALUE = 5 [14ns_FIX_G]
Block delays = 914 914
[INFO | 07/28/14 15:49:17]:
== COPY TIMING PARAMS A-->B Command Status Summary ==
Instrument Location Active Status | Instrument Location Active Status |
--------------------------------------------------------------|--------------------------------------------------------------|
ctacf124 TEST3 * (0) SUCCESS |
[INFO | 07/28/14 15:49:17] Begin post-command status check/recovery: ...
--
MatthewStedinger - 28 Jul 2014