Timing setup is presently: 5 [14ns_FIX_G]
***********************************************************
This shifts the waveform sample point on
BLOCK A and B for all active instruments 0.4ns (40 computer units)
later in time to examine the waveform zero-crossing point.
This is only accurate for the FIXED GAIN amplifier mode.
The undo this change, you must restart the program.
************************************************************
Do you wish to proceed [y/n]? [n]: y
Sending updated parameters...
Prep() function status = 0
--Copying and transferring structure set...
--Initializing command...
--Executing command...
--Waiting for handshake completion...
<ctacf018> CMD_DONE (3)
--Post function loop...
OP TIMING SETUP VALUE = 5 [14ns_FIX_G]
Block delays = 648 1044
[INFO | 07/28/14 16:26:04]:
== Enable FG Zero-Crossing Sample Point Command Status Summary ==
Instrument Location Active Status | Instrument Location Active Status |
--------------------------------------------------------------|--------------------------------------------------------------|
ctacf018 20E * (0) SUCCESS |
[INFO | 07/28/14 16:26:04] Begin post-command status check/recovery: ...
--
MatthewStedinger - 28 Jul 2014