********* FIND BLOCK TURN MARKER DELAY **********
Will use cached channel delays.
Checking timing setup of the first active device.
Startup checks shall have ensured that all active
devices are configured for the same timing setup.

Enter species [POSITRONS=0, ELECTRONS=1]    :
TBLOCK = 0
Setting number of turns to 2
Prep() function status = 0
--Copying and transferring structure set...
--Initializing command...
--Executing command...
--Waiting for handshake completion...
<ctacf124> ............  CMD_DONE  (3)
--Post function loop...


Settings determined for TIMING BLOCK 0:
   b_p_offset = 154
   cTMD       = 0
   bTMD       = 8
   Initial CD = 512


[INFO  | 07/28/14 12:51:24]:
 == FIND bTMD Command Status Summary ==

 Instrument    Location    Active            Status           | Instrument    Location    Active            Status           |
--------------------------------------------------------------|--------------------------------------------------------------|
  ctacf124      TEST3        *     (0) SUCCESS                |
[INFO  | 07/28/14 12:51:24]  Begin post-command status check/recovery:   ...

-- MatthewStedinger - 28 Jul 2014

This topic: ACC/Bunch > WebHome > CBICManPage > FindBTMD
Topic revision: 28 Jul 2014, mgs9
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding CLASSE Wiki? Send feedback