Sequence type encountered with 8 steps.


Select the desired timing conditions:
   1 = Positrons, 4nSec, timing block A - Variable Gain
   2 = Positrons, 4nSec, timing block B - Variable Gain    Time-scan ONLY
   3 = Positrons, 14nSec - Variable Gain

   4 = Electrons, 4nSec, timing block A - Variable Gain
   5 = Electrons, 4nSec, timing block B - Variable Gain    Time-scan ONLY
   6 = Electrons, 14nSec - Variable Gain

   7 = Positrons, 4nSec, timing block A - FIXED Gain
   8 = Positrons, 4nSec, timing block B - FIXED Gain    Time-scan ONLY
   9 = Positrons, 14nSec - FIXED Gain

   10 = Electrons, 4nSec, timing block A - FIXED Gain
   11 = Electrons, 4nSec, timing block B - FIXED Gain    Time-scan ONLY
   12 = Electrons, 14nSec - FIXED Gain


 "T1B1" bunch current should be in the neighborhood of 0.75mA--1.25mA for this process.

  -1 = Done
  Conditions: Selection : [1]: 9
 14ns 'LDINIT' --  LOAD  Train-1  Bunch-1  ('T1B1')  POSITRONS





-------------------------------------------------
  Scrubbing timing parameters for block A
-------------------------------------------------
--Copying and transferring structure set...
--Post function loop...
TIMING setup = 5
SCRUB TIMING PARAMS for BLOCK 0
Block delays = -1   868

[INFO  | 07/28/14 15:39:43]:
 == SCRUB TIMING PARAMS Command Status Summary ==

 Instrument    Location    Active            Status           | Instrument    Location    Active            Status           |
--------------------------------------------------------------|--------------------------------------------------------------|
  ctacf124      TEST3        *     (0) SUCCESS                |



-------------------------------------------------
  Setting timing setup to 14ns_FIX_G
-------------------------------------------------
1 instruments online
Initializing cTMD value to 0
--Copying and transferring structure set...
--Initializing command...
--Executing command...
--Waiting for handshake completion...
<ctacf124>   CMD_DONE  (3)
--Post function loop...
OP TIMING SETUP VALUE = 5 [14ns_FIX_G]
Block delays = -1   868

[INFO  | 07/28/14 15:39:43]:
 == SET TIMING SETUP Command Status Summary ==

 Instrument    Location    Active            Status           | Instrument    Location    Active            Status           |
--------------------------------------------------------------|--------------------------------------------------------------|
  ctacf124      TEST3        *     (0) SUCCESS                |



-------------------------------------------------
  Configuring gains for setting # 0.
-------------------------------------------------
--Copying and transferring structure set...
--Initializing command...
--Executing command...
--Waiting for handshake completion...
<ctacf124>   CMD_DONE  (3)
--Post function loop...
gain setting = 0  (gain code = 0)

[INFO  | 07/28/14 15:39:43]:
 == SET GAINS Command Status Summary ==

 Instrument    Location    Active            Status           | Instrument    Location    Active            Status           |
--------------------------------------------------------------|--------------------------------------------------------------|
  ctacf124      TEST3        *     (0) SUCCESS                |



-------------------------------------------------
  Determining FINAL BLOCK TURNS MARKER DELAY for block A...
-------------------------------------------------
--Copying and transferring structure set...
--Initializing command...
--Executing command...
--Waiting for handshake completion...
<ctacf124> ............  CMD_DONE  (3)
--Post function loop...


Settings determined for TIMING BLOCK 0:
   b_p_offset = 154
   cTMD       = 0
   bTMD       = 8
   Initial CD = 512


[INFO  | 07/28/14 15:39:46]:
 == FIND bTMD Command Status Summary ==

 Instrument    Location    Active            Status           | Instrument    Location    Active            Status           |
--------------------------------------------------------------|--------------------------------------------------------------|
  ctacf124      TEST3        *     (0) SUCCESS                |



-------------------------------------------------
  Time scan (BUNCH 1)...
-------------------------------------------------
--Copying and transferring structure set...
--Initializing command...
--Executing command...
--Waiting for handshake completion...
<ctacf124> ......  CMD_DONE  (3)
--Post function loop...
Obtaining waveform data...

[INFO  | 07/28/14 15:39:51]:
 == TIME SCAN                           (do adjust_cbpm_times [pos/ele]) Command Status Summary ==

 Instrument    Location    Active            Status           | Instrument    Location    Active            Status           |
--------------------------------------------------------------|--------------------------------------------------------------|
  ctacf124      TEST3        *     (0) SUCCESS                |
Executing 'final' function...
MailboxID = 0
max block delay  = 1400
init block delay = 421
block step size  = 1
writing # delay steps = 1400
Dumping TIMING SCAN data to file 'TS-046351-124.dat'.
Each point is a 10-turn average.
MailboxID = 0
Dumping CHANNEL CALIBRATION data to file 'CC-046351-124.dat'.



   Timing Adjustment Summary:

                          Card-to-card change      Absolute change on each card           ButtonSum
                      (diff from c0 before/after)                                 Status
BAD                                                   c0     c1     c2     c3
---------------------------------------------------------------------------------------------------
[X]  TEST3 (ctacf124)        +1    +15     +1        +10     +9     -5     +9      ERROR     7748

    ***************************************************************
    *                           WARNING                           *
    * Large timing adjustments were performed on  1 Instruments! *
    *                (See summary above for details.)             *
    ***************************************************************



                                  - Status of Instruments -

  Name    Hostname  Turn Cnt |  Name    Hostname  Turn Cnt |  Name    Hostname  Turn Cnt |

*******************************************************

# online : 1
# in List: 1
Percentage online:   100  , Failure Threshold:   90

*******************************************************
  TEST3   ctacf124  1012874  |


   --- [ctacf124]   -   CESR_BPM_TEST3 ---
BP offsets               :  154  311
Common turns marker delay:  0
Block turns marker delays:  8  9
block_delays              :  1121  868
Channel delays           :  522  521  507  521
                            634  653  613  745




Would you like to save the timing parameters to an intermediate file? (y/n): [n]: y
MailboxID = 0
Saving timing parameters to intermediate file:
 /nfs/cesr/online/instr/CBPM/config/09/instrument_parameters.009781...
Accessing file section >BPM_TEST3<
==== Saving timing parameters for instrument BPM_TEST3
Stopping faccess() session...
Done saving timing parameters to file:
 /nfs/cesr/online/instr/CBPM/config/09/instrument_parameters.009781...
Prep() function status = 0
[INFO  | 07/28/14 15:40:02]  Begin post-command status check/recovery:   ...