CBETA Vacuum System

SX 4-pass vacuum drawing

Pre-production Girder

Beam Position Monitor

Test BPM in diagnostic line

A test BPM is planned to be installed in the diagnostic line to test buttons that will be installed in the FFAG section. The chamber for this test BPM includes a taper from the smaller diagnostic beam pipe diameter to the FFAG beam pipe diameter.

Overall Vacuum Layout

-- RobMichnoff - 01 Mar 2017

Topic attachments
I Attachment Action Size Date Who Comment
7206-225_SX_4-Pass_08022019.pdfpdf 7206-225_SX_4-Pass_08022019.pdf manage 923 K 07 Aug 2019 - 15:39 RobMichnoff  
7206-301_Dummy-1.pdfpdf 7206-301_Dummy-1.pdf manage 711 K 01 Mar 2017 - 14:37 RobMichnoff CBETA Pre-production girder vacuum drawing
7206-611_Test_in_DI-1.pdfpdf 7206-611_Test_in_DI-1.pdf manage 253 K 01 Mar 2017 - 20:37 RobMichnoff CBETA test BPM drawing to be installed in diagnostic line
cbeta_full_0306_2017_Vac_Instr.pptxpptx cbeta_full_0306_2017_Vac_Instr.pptx manage 345 K 28 Mar 2017 - 14:43 RobMichnoff  
This topic: CBETA > WebHome > CBETA-Vacuum-Systems-and-Beam-Stop
Topic revision: 07 Aug 2019, RobMichnoff
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding CLASSE Wiki? Send feedback