-- AdamBartnik - 07 Mar 2018

Find the Klystron (SLAC) power supply EPICS screen

  • Choose "RF Operations" -> "RF/Klystron Control"

fede1d3d51ea152110f9d695a88e1f49.png
  • Choose "Klystron HV Ready Chain"

893eb46fdd3c17fe85199213ea1995ee.png
  • Look at the state on this screen

2370640b4bbaeefb319a1e6da0ca99a4.png
  • In the upper-right corner, look for "Delay Warmup"
    • If this says "30 minutes", then proceed to "Warmup On" below
    • If this says "0 minutes", then proceed to "Standby Reset" below

Warmup on

  • If the power supply has been completely shut off, then you have to start the "Warmup On" countdown, which will take 30 minutes to finish. After the timer, the power supply will be ready to have the HV turned up.
  • Click "Warmup On" at the bottom of the Klystron HV Ready Chain screen
  • On the popup window, click "On"
977ae594248ac6c5bcd6083703439a58.png
  • Close the popup screen if it doesn't automatically go away.
  • You will notice on the original screen that the "Delay Warmup" begins counting down from 30.0 minutes

Standby Reset

  • If the power supply has been used recently, it is better to keep it in standby, because it is faster to turn back on, and also to not over-excercise the filament.
  • Click "Standby Reset" at the bottom of the Klystron HV Ready Chain screen.
8d2f109ad6652e91691a88a4b0cf7c5b.png
  • Click "Reset" on the popup window
  • You will notice the "Filament PS I" timer for each klystron counting down from 5.0 minutes
  • After the timer, the power supply will be ready to have its high voltage turned on

Topic attachments
I Attachment Action Size Date Who Comment
2370640b4bbaeefb319a1e6da0ca99a4.pngpng 2370640b4bbaeefb319a1e6da0ca99a4.png manage 90 K 07 Mar 2018 - 09:54 AdamBartnik Auto-attached by ImagePlugin
893eb46fdd3c17fe85199213ea1995ee.pngpng 893eb46fdd3c17fe85199213ea1995ee.png manage 46 K 07 Mar 2018 - 09:54 AdamBartnik Auto-attached by ImagePlugin
8d2f109ad6652e91691a88a4b0cf7c5b.pngpng 8d2f109ad6652e91691a88a4b0cf7c5b.png manage 28 K 07 Mar 2018 - 10:09 AdamBartnik Auto-attached by ImagePlugin
977ae594248ac6c5bcd6083703439a58.pngpng 977ae594248ac6c5bcd6083703439a58.png manage 37 K 07 Mar 2018 - 10:09 AdamBartnik Auto-attached by ImagePlugin
fede1d3d51ea152110f9d695a88e1f49.pngpng fede1d3d51ea152110f9d695a88e1f49.png manage 54 K 07 Mar 2018 - 09:54 AdamBartnik Auto-attached by ImagePlugin
This topic: CBETA > SlacStartup
Topic revision: 07 Mar 2018, AdamBartnik
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding CLASSE Wiki? Send feedback