Children of TrainingOperations in CBETA Web
Results from CBETA web retrieved at 15:40 (Local)
2kHeaterReset
* Go to MLC electronics rack (near RF desk in L0E) * Power cycle TDK power supply for 2k heater (wait with the power off for some time before turning back on) ...
NEW - 27 Jan 2020 - 11:13 by cg248
AccessWithKeyProcedure
Main.JamesCrittenden 14 Jan 2020 1) Run the Access Area script on the main EDM screen. 2) Make the access. 3) Return all keys. 4) Turn on the gun. 5) Turn on the ...
NEW - 14 Jan 2020 - 13:28 by JamesCrittenden
BuncherTuning
The buncher tunes like anything else, and its easiest to do it in Cav Loop if necessary, you can maximize field in Kly Loop. * Go to LLRF A boards and select...
NEW - 29 Jan 2020 - 22:59 by kd324
KnobberDefinitions
Main.JamesCrittenden 08 Jan 2020 I) Measure the crosstalk from magnet A and find the compensating magnet B A) Observe a BPM immediately upstream of magnet A ...
r2 - 28 Jan 2020 - 14:54 by JamesCrittenden
MLCTuningNotes
Main.JamesCrittenden 18 Jan 2020 Tuning at the beginning of the shift Open the strip tool files /home/erpopr/mlc/striptool_files/MLC_piezo_cntrl_vltg.stp and /h...
r3 - 20 Jan 2020 - 09:15 by JamesCrittenden
ResetMLCpiezoamps
Main.JamesCrittenden 11 Jan 2020 Go to rack L0E.R803 in SSA area. Take picture of status of amplifiers on south face of rack. Cycle power on power strip accessib...
NEW - 11 Jan 2020 - 13:28 by JamesCrittenden
RestartBPM
* Locate the password for the erpxbpm### root account. If you don't know it, ask Kirsten, John Dobbins, Scott, or Adam. * ssh root@erpxbpm001; type yes if it a...
NEW - 28 Jan 2020 - 15:18 by kd324
RestartViewScreenIOC
Main.JamesCrittenden 14 Jan 2020 Example: restart IS2SCR01: Log in to either erp34 or erp36 as epicsioc. cd l0e/cam ./restartIS2SCR01 Then hit ctrl a d
r2 - 19 Jan 2020 - 12:11 by JamesCrittenden
SlowBLM
To move BLMs around: * cd /nfs/cbeta/hw/epics/ioc/BLM_CsI/iocBoot/iocBLM_CsI * edit the *.cmd files * Change the target, channel, and device id to ...
NEW - 03 Feb 2020 - 17:08 by kd324
SplitterSetup
Setting up a splitter (which I just tried to do, so my memory is fresh) goes like this: 1 Somehow manage to get the beam to the screen at the end. 1 ...
NEW - 02 Nov 2019 - 00:09 by StephenBrooks
TurnOnBuncherIOT
Main.JamesCrittenden 19 Jan 2020 If the ICM buncher IOT has not been turned on, the buncher will not go to 35 kV and cav_loop. Go to EDM page RF Operations/Bunche...
NEW - 19 Jan 2020 - 12:06 by JamesCrittenden
Number of topics: 11
Copyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors. Ideas, requests, problems regarding CLASSE Wiki? Send feedback