Main.KaiwenZheng 08 Dec 2016 Magnetic Sensitivity Plotting This page explains the method to plot the magnetic sensitivity of standard full tunes SQ1. The attache...
Mission * Check whether the 4K plate and the pulse tube bottom plate are in good thermal contact * Test the amount of heat built up due to the rubber cement ...
Mission * Test the thermometer again with thermal grease Cooldown Procedure Cooling down... * Started roughing on vacuum can @ 11:22 EST 06/08/2017. * Aft...
Mission * Test the thermal conductivity of the 148GHz filter * Calibrate thermometer X96703 Cooldown Procedure Cooling down... * Started roughing on vacuu...
Mission * Evaluate the load of wires * Calibrate thermometer X96703 Cooldown Procedure Cooling down... * Started roughing on vacuum can @ 10:49 EST 7/1/20...
Mission * Check if the heat sink works * Test the thermo conductivity of filter Cooldown Procedure Cooling down... * Started roughing on vacuum can @ 14:1...
Mission * Check the conductivity of the stripe * Test the thermo conductivity of filter at 40K Cooldown Procedure Cooling down... * Started roughing on va...