Data Files

• run034.dat: Straight Through Data (H Corrector at 0 Amps)

• run035.dat: Magnet cal +0.5A corrector

• run036.dat: Magnet cal +1.0A corrector

• run037.dat: Magnet cal -0.5A corrector

• run039.dat: Magnet cal 0.0A corrector test for drift

• run038.dat: Magnet cal -1.0A corrector

• run040.dat: Time sweep 12.00ns, 0.0A corrector

• run041.dat: Time sweep 12.00ns, 0.3A corrector

• run042.dat: Time sweep 12.25ns, 0.3 corrector

• run043.dat: Time sweep 12.50ns, 0.4A corrector

• run044.dat: Time sweep 12.75ns, 0.6A corrector

• run045.dat: Time sweep 13.00ns, 0.8A corrector

• run046.dat: Time sweep 13.25ns, 1.0A corrector

• run047.dat: Time sweep 13.50ns, 1.2A corrector

• run048.dat: Time sweep 13.75ns, 1.5A corrector

• run049.dat: Time sweep 14.00ns, 1.6A corrector

• run050.dat: Time sweep 14.25ns, 1.8A corrector

• run051.dat: Time sweep 14.50ns, 2.0A corrector

• run052.dat: Time sweep 14.75ns, 2.2A corrector

• run053.dat: Time sweep 15.00ns, 2.4A corrector

• run054.dat: Time sweep 15.25ns, 2.4A corrector

• run055.dat: Time sweep 15.50ns, 2.5A corrector

• run056.dat: Time sweep 15.75ns, 2.4A corrector

• run057.dat: Time sweep 16.00ns, 2.2A corrector

• run058.dat: Time sweep 16.25ns, 2.1A corrector

• run059.dat: Time sweep 16.50ns, 2.1A corrector

• run060.dat: Time sweep 16.75ns, 1.9A corrector

• run061.dat: Timing sweep 17.00ns, 1.7A corrector

• run062.dat: Time sweep 17.25ns, 1.7A corrector

• run074.dat: Time sweep new bpm code 15.50ns, 2.5A corrector

• run081.dat: Straight through test with updated DAQ code

• run085.dat: Straight through run after trajectory/focus adjustments to eliminate scraping in the kicker

• run086.dat: High statistics peak of kick run after trajectory/focus adjustments

• run092.dat: Sitting on nominal peak after latest changes (retune trajectory and 9-cell, new pulse generator to provide trigger for pulser)

• run093.dat: Repeat of previous run for comparison

• run095.dat: 12.5 ns/0.923 amp data point

• run097.dat: 13.5 ns/1.758 amp data point

• run099.dat: 14.5 ns/2.202 amp data point

• run101.dat: 15.5 ns/1.758 amp data point (possible stability problems with machine)

• run102.dat: 14.25ns/2.202 amp data point

• run103.dat: 14.5ns/2.202 amp data point

• run104.dat: 14.75ns/2.202 amp data point

• run105.dat: 15.0ns/2.202 amp data point

• run106.dat: 15.5ns/2.202 amp data point

• run107.dat: 16.5ns/0.923 amp data point

• 06_05_26_CornellGOLDEN2.sr: Magnet Settings File for scans (5/26/06 8pm)

• 06_05_26_CornellGOLDENSETUP.sr: Magnet setup file for scan conditions

This topic: ILC > WebHome > CornellAccel > FastKickers > IllDaqData
Topic revision: 26 May 2006, MarkPalmer

---