...

Take Pedestals. Save and install them.

Load T1B1 Positrons (14nS LDINIT), Fill to 0.75 mA, turn Separators OFF

Time in 14ns_FIX_G (Block A), Save Timing Parameters, Install updated Parameters, Restart servers, Verify timings.
Set Gain to 7. Time in 14ns_VAR_G (Block A), Save Timing Parameters, Install updated Parameters, Restart servers, Verify timings.
Dump beam.

Load T1B1 Positrons (4nS LDINIT), Fill to 0.75 mA, turn Separators OFF

Time in 4ns_P_FIX_G (Block A), Save Timing Parameters, Install updated Parameters, Restart servers, Verify timings.
Set Gain to 7. Time in 4ns_P_VAR_G (Block A), Save Timing Parameters, Install updated Parameters, Restart servers, Verify timings.
Time in Current Monitor for 4ns_P_VAR_G (Block A), Save Timing Parameters, Install updated Parameters, Restart servers, Verify timings. Dump beam.

Load T1B2 Positrons, Fill to 0.75 mA, turn Separators OFF

Time in 4ns_P_FIX_G (Block B), Save Timing Parameters, Install updated Parameters, Restart servers, Verify timings.
Set Gain to 7. Time in 4ns_P_VAR_G (Block B), Save Timing Parameters, Install updated Parameters, Restart servers, Verify timings.
Time in Current Monitor for 4ns_P_VAR_G (Block B), Save Timing Parameters, Install updated Parameters, Restart servers, Verify timings. Dump beam.

...

Load T1B1 Electrons (14nS LDINIT), Fill to 0.75 mA, turn Separators OFF

Time in 14ns_FIX_G (Block B), Save Timing Parameters, Install updated Parameters, Restart servers, Verify timings.
Set Gain to 7. Time in 14ns_VAR_G (Block B), Save Timing Parameters, Install updated Parameters, Restart servers, Verify timings.
Dump beam.

Load T1B1 Electrons (4nS LDINIT), Fill to 0.75 mA, turn Separators OFF

Time in 4ns_E_FIX_G (Block A), Save Timing Parameters, Install updated Parameters, Restart servers, Verify timings.
Set Gain to 7. Time in 4ns_E_VAR_G (Block A), Save Timing Parameters, Install updated Parameters, Restart servers, Verify timings.
Time in Current Monitor for 4ns_E_VAR_G (Block A), Save Timing Parameters, Install updated Parameters, Restart servers, Verify timings. Dump beam.

Load T1B2 Electrons , Fill to 0.75 mA, turn Separators OFF

Time in 4ns_E_FIX_G (Block B), Save Timing Parameters, Install updated Parameters, Restart servers, Verify timings.
Set Gain to 7. Time in 4ns_E_VAR_G (Block B), Save Timing Parameters, Install updated Parameters, Restart servers, Verify timings.
Time in Current Monitor for 4ns_E_VAR_G (Block B), Save Timing Parameters, Install updated Parameters, Restart servers, Verify timings. Dump beam.

-- MatthewStedinger - 08 Dec 2014