-1) FIND bTMD
  0) Change Menu Level(USER,SUPERUSER,EXPERT)
  1) FIND BUNCH
  2) GET STATUS AND DEBUG
  3) TEST DATA BUFFERS
  4) GET TURN-BY-TURN DATA              (do cbpm_tbt_[positrons/electrons])
  5) GET PROCESSED DATA
  6) MEASURE 4ns BUNCH CURRENTS         (start DEFAULT Current Monitor)
  7) FIND cTMD
  8) GET BETATRON PHASE                 (Measure Phase)
  9) SAVE TIMING PARAMETERS
 10) SAVE PEDESTAL PARAMETERS
 11) TIME SCAN                          (do adjust_cbpm_times [pos/ele])
 12) SET GAINS
 13) GET TEMPERATURES
 14) REREAD PARAMETER FILES
 15) SELECT ACTIVE INSTRUMENTS          (List Instruments)
 16) IDLE COMMAND
 17) ENTER SERVER MODE                  (Start Server)
 18) DUMP MPM INTERFACE STRUCTURE
 19) ACQUIRE PEDESTALS
 20) DUMP RAW DATA
 21) CHECK PULSE
 22) SET TIMING SETUP
 23) INSTALL UPDATED PARAMETERS
 24) RESET COLDFIRE
 25) PROGRAM FLASH
 26) RESET AND INIT
 27) POWER CYCLE - RESET AND INIT       (Cycle Power)
 28) TIME-IN
 29) INSTALL ELECTRONIC GAIN CORRECTIONS
 30) APPLY GAIN MAPPING CORRECTIONS
 31) COMPOSE BUNCH PATTERN              (Create Bunch Pattern)
 32) Clear Debug Struct
 33) SCRUB TIMING PARAMS
 34) COPY TIMING PARAMS A-->B
 35) Diagnostic Dump
 36) EXIT                               (Exit)
 37) Enable FG Zero-Crossing Sample Point
 38) Install Turn-By-Turn Bunch Pattern (Set Bunch Pattern)
 39) Test Life
 40) Calibrate 4ns BUNCH CURRENTS
 41) Start Realtime Position Monitor
 42) MEASURE 4ns BUNCH CURRENTS         (start OLD VERSION Current Monitor)
 43) ENTER SERVER INJECTION MODE                        (Start Server for Injection)
 44) COPY TIMING PARAMS A-->B+0.5 nS

[INFO  | 07/28/14 12:08:52] :  ---------------------------