CURRENT MONITOR MODE DEFAULT
debug level = 0, gui flag = 0, maint mode = 0 

GTK+ Initialization successful.

Using custom application config file './cbic.conf-4ns-VariableGain'
Reading application configuration...
Setting primary communications method to  ETHERNET 
Timing setup taken from config file: (0) 4ns_P_VAR_G 
Attempting connection to MPMnet manager...
Mnet_connect call returned : 1
Looking in file /nfs/cesr/online/instr/CBPM/allocation/Instrument_allocations
done.

This program instance will become server ID [717554] if placed in server mode.


Number of instruments requested = 1



----------------------------------------------------------------------
Reading general instrument parameters for all requested instruments...
----------------------------------------------------------------------
Reading location-dependent parameters for: BPM_12W2
Stopping faccess() session...



----------------------------------------------------------------------
Reading instrument-specific parameters for all requested instruments...
----------------------------------------------------------------------
Reading instrument-dependent parameters for: BPM_12W2
Stopping faccess() session...



----------------------------------------------------------------------
Loading the Instrument Code parameters to all requested instruments...
----------------------------------------------------------------------


 *********************************************** 
     New Time Scan Diagnostics Enabled  
 ***********************************************



-------- Verifying connectivity for instrument ctacf077 --------
 CBPM PKT ALL  103, Ping test to [ctacf077]...OK, [INFO  | 06/17/14 10:09:07]cbi_gp_struct:  cbi_net:  cbi_net_rd_mem: select: receive timeout

Read IDENT via ETHERNET, Communication attempt to     ctacf077 (CBPM PKT ALL 103)  @  12W2    [1;37;41mFAILED![0m 

Ensuring all power supply relays are in the 'ON' state.
Waiting 4 seconds for power to stabilize.
Attempting XBUS reboot of instrument ctacf077 (CBPM DAT ALL) ele 103...
Flagging instrument for retry...


**************************************************************
 Some instruments were soft-reset in the first pass.  Now
 waiting 20 seconds for these to complete their boot process.
**************************************************************




-------- Verifying connectivity for instrument ctacf077 --------
 CBPM PKT ALL  103, Ping test to [ctacf077]...OK, Read IDENT via ETHERNET,    Identification Read [32;1mOK[0m 


 1 Instrument is ONLINE.

Location     = 12W2
Checking communications structure versions for instrument <ctacf077>...
EXE Name = CBPM_II.ldr
Setting up and activating BPM  ctacf077 (192.168.32.127 )  @  CBPM PKT ALL 103 
Initializing active gain setting to '-1'
Sending all: phase, pedestal, gain configuration, and timing configuration settings. 
Commanding gain and timing setup settings...
<ctacf077>   CMD_DONE  (3)
OP TIMING SETUP VALUE = 0 [4ns_P_VAR_G]
Block delays = 495   717
<ctacf077>   CMD_DONE  (3)
gain setting = 5  (gain code = 272)
Sending all code parameters...
Final timing setup = 0 [4ns_P_VAR_G]



Proceeding directly into 4ns CURRENT MONITOR MODE as per command line request

********************************************************************************************************


60 HZ ON


Setting averaging mode to PROC_SIMPLE_AVG_MODE 
Will acquire 128 turns of data per measurement.
Continuous acquisition mode is enabled.
Processed data buffer index will be reset to 0 for this command.
Prep() function status = 2
--Copying and transferring structure set...
--Post function loop...
Number of bunches requested = 640

    CMD PARAMS Structure Contents
species     :  0
num_turns   :  128
trig_turns_delay:  0
spacex_turn :  0
delay_cal   :  0
gain_cal    :  0
gain_xcal   :  0
avg_mode    :  1
scale_mode  :  3
update_mode :  0
  Pre-Rotation        Post-Rotation 
---------------------------------------
0  |   |   |   |     0  |   |   |   |
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
XXXXXXXXXXXXXXXX     RRRRRRRRRRRRRRRR
-------------
***********************************************
 Changing configuration as per                 
                   injection software request. 
   Tue Jun 17 10:10:16 2014
   
***********************************************
<ctacf077> .-\|/-.-\|/-  CMD_DONE  (3)
***********************************************
  Waiting for measurement to halt...Done.
***********************************************
                 Tblock_0    Tblock_1
 Signal Input : 0  1  2  3  0  1  2  3 
----------------------------------------
 Gain Setting : 5  5  5  5  5  5  5  5  
<ctacf077>   CMD_DONE  (3)
gain setting = 5  (gain code = 272)
***********************************************
  Setting timing setup to  4ns_P_VAR_G                  
***********************************************
<ctacf077>   CMD_DONE  (3)
OP TIMING SETUP VALUE = 0 [4ns_P_VAR_G]
Block delays = 495   717
***********************************************
REMINDER: Current monitor has an upper gain 
          setting limit of  8 .
GAIN SETTING = 5
***********************************************


***********************************************
 4ns Bunch-by-bunch current monitor running... 
***********************************************

Type 'q' and then <ENTER> to exit current monitor mode, using DEFAULT algorithm: 
Write counter (in 'POS 2NS MAMP' element 1282):       ***********************************************
 Changing configuration as per                 
                   injection software request. 
   Tue Jun 17 10:10:16 2014
   
***********************************************
<ctacf077> .-\|/-.-\|/-  CMD_DONE  (3)
***********************************************
  Waiting for measurement to halt...Done.
***********************************************
                 Tblock_0    Tblock_1
 Signal Input : 0  1  2  3  0  1  2  3 
----------------------------------------
 Gain Setting : 5  5  5  5  5  5  5  5  
<ctacf077>   CMD_DONE  (3)
gain setting = 5  (gain code = 272)
***********************************************
  Setting timing setup to  4ns_E_VAR_G                  
***********************************************
<ctacf077>   CMD_DONE  (3)
OP TIMING SETUP VALUE = 1 [4ns_E_VAR_G]
Block delays = 477   701
***********************************************
REMINDER: Current monitor has an upper gain 
          setting limit of  8 .
GAIN SETTING = 5
***********************************************


***********************************************
 4ns Bunch-by-bunch current monitor running... 
***********************************************

Type 'q' and then <ENTER> to exit current monitor mode, using DEFAULT algorithm: 
q