Sequence type encountered with 5 steps. Skipping communication connect! --Copying and transferring structure set... --Post function loop... [INFO | 07/28/14 15:26:58]: == RESET INSTRUMENT Command Status Summary == Instrument Location Active Status | Instrument Location Active Status | --------------------------------------------------------------|--------------------------------------------------------------| ctacf100 40E * (0) SUCCESS | Waiting 1s for instruments to boot... Pushing gain configuration values... cbi_net_fdopen:connect: : Connection refused [ERROR | 07/28/14 15:27:14]cbi_open_sockets_active: Bad socket fd. Unable to connect to remote host - ctacf100 cbi_net_error_buf: cbi_net_fdopen: connect error cbi_net_net_close: socket close successful. --Copying and transferring structure set... --Post function loop... OP TIMING.active_timing_setup = 5 [14ns_FIX_G] [ERROR | 07/28/14 15:27:14]cbi_inst_loop: Post function failed for instrument ctacf100. [INFO | 07/28/14 15:27:14]: == PUSH FULL CONFIG Command Status Summary == Instrument Location Active Status | Instrument Location Active Status | --------------------------------------------------------------|--------------------------------------------------------------| ctacf100 40E * (7) CHANGED GAIN | Setting gains cbi_net_fdopen:connect: : Connection refused [ERROR | 07/28/14 15:27:14]cbi_open_sockets_active: Bad socket fd. Unable to connect to remote host - ctacf100 cbi_net_error_buf: cbi_net_fdopen: connect error cbi_net_net_close: socket close successful. --Copying and transferring structure set... [ERROR | 07/28/14 15:27:14]cbi_copy_touched_structs: Failed to send structure to instrument ctacf100 @ 40E [ERROR | 07/28/14 15:27:14]cbi_inst_loop: Structure set transfer failure temp-->instrument ctacf100 @ 40E --Initializing command... --Executing command... --Waiting for handshake completion... --Post function loop... [INFO | 07/28/14 15:27:14]: == SET GAINS Command Status Summary == Instrument Location Active Status | Instrument Location Active Status | --------------------------------------------------------------|--------------------------------------------------------------| ctacf100 40E (1) SUCCESS w/ GATE ENABLE | Setting timing setup --Copying and transferring structure set... --Initializing command... --Executing command... --Waiting for handshake completion... --Post function loop... [INFO | 07/28/14 15:27:14]: == SET TIMING SETUP Command Status Summary == Instrument Location Active Status | Instrument Location Active Status | --------------------------------------------------------------|--------------------------------------------------------------| ctacf100 40E (0) SUCCESS | [INFO | 07/28/14 15:27:14] Begin post-command status check/recovery: ...-- MatthewStedinger - 28 Jul 2014