0) Change Menu Level(USER,SUPERUSER,EXPERT)
  4) GET TURN-BY-TURN DATA              (do cbpm_tbt_[positrons/electrons])
  5) GET PROCESSED DATA
  6) MEASURE 4ns BUNCH CURRENTS         (start DEFAULT Current Monitor)
  8) GET BETATRON PHASE                 (Measure Phase)
  9) SAVE TIMING PARAMETERS
 10) SAVE PEDESTAL PARAMETERS
 11) TIME SCAN                          (do adjust_cbpm_times [pos/ele])
 12) SET GAINS
 14) REREAD PARAMETER FILES
 15) SELECT ACTIVE INSTRUMENTS          (List Instruments)
 17) ENTER SERVER MODE                  (Start Server)
 19) ACQUIRE PEDESTALS
 22) SET TIMING SETUP
 23) INSTALL UPDATED PARAMETERS
 25) PROGRAM FLASH
 27) POWER CYCLE - RESET AND INIT       (Cycle Power)
 30) APPLY GAIN MAPPING CORRECTIONS
 31) COMPOSE BUNCH PATTERN              (Create Bunch Pattern)
 36) EXIT                               (Exit)
 38) Install Turn-By-Turn Bunch Pattern (Set Bunch Pattern)
 41) Start Realtime Position Monitor
 43) ENTER SERVER INJECTION MODE                        (Start Server for Injection)

[INFO  | 07/28/14 12:08:04] :  ---------------------------