 |
|
You are here: CLASSE Wiki>ACC/Bunch Web>CBICManPage>PowerCycle (28 Jul 2014, mgs9)Edit Attach
Sequence type encountered with 6 steps. Would you like to cycle power for ALL active instruments? (y/n): [n]: y Turning off power to all active instruments... Waiting for 4 seconds for power supply bleed-down... Turning on power supplies... Skipping communication connect! --Copying and transferring structure set... --Post function loop... [INFO | 07/28/14 15:28:13]: == POWER CYCLE Command Status Summary == Instrument Location Active Status | Instrument Location Active Status | --------------------------------------------------------------|--------------------------------------------------------------| ctacf100 40E * (0) SUCCESS | Executing 'final' function... Waiting for 7 seconds for Cold Fire to boot back up... Skipping communication connect! --Copying and transferring structure set... --Post function loop... [INFO | 07/28/14 15:28:20]: == RESET INSTRUMENT Command Status Summary == Instrument Location Active Status | Instrument Location Active Status | --------------------------------------------------------------|--------------------------------------------------------------| ctacf100 40E * (0) SUCCESS | Waiting 22s for instruments to boot... Pushing all cached timng and gain configuration values... --Copying and transferring structure set... --Post function loop... OP TIMING.active_timing_setup = 5 [14ns_FIX_G] [INFO | 07/28/14 15:28:42]: == PUSH FULL CONFIG Command Status Summary == Instrument Location Active Status | Instrument Location Active Status | --------------------------------------------------------------|--------------------------------------------------------------| ctacf100 40E * (0) SUCCESS | Setting gains --Copying and transferring structure set... --Initializing command... --Executing command... --Waiting for handshake completion... <ctacf100> CMD_DONE (3) --Post function loop... gain setting = 5 (gain code = 272) [INFO | 07/28/14 15:28:42]: == SET GAINS Command Status Summary == Instrument Location Active Status | Instrument Location Active Status | --------------------------------------------------------------|--------------------------------------------------------------| ctacf100 40E * (0) SUCCESS | Setting timing setup --Copying and transferring structure set... --Initializing command... --Executing command... --Waiting for handshake completion... <ctacf100> CMD_DONE (3) --Post function loop... OP TIMING SETUP VALUE = 5 [14ns_FIX_G] Block delays = 1039 857 <ctacf100> CMD_DONE (3) gain setting = 0 (gain code = 0) [INFO | 07/28/14 15:28:42]: == SET TIMING SETUP Command Status Summary == Instrument Location Active Status | Instrument Location Active Status | --------------------------------------------------------------|--------------------------------------------------------------| ctacf100 40E * (0) SUCCESS | Synchronizing all instrument turn counters... done. [INFO | 07/28/14 15:28:43] Begin post-command status check/recovery: ...-- MatthewStedinger - 28 Jul 2014
Edit | Attach | Print version | History: r1 | Backlinks | View wiki text | Edit wiki text | More topic actions
Topic revision: r1 - 28 Jul 2014, mgs9
Copyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors. Ideas, requests, problems regarding CLASSE Wiki? Send feedback