Analyzer Crystal Inventory The following table contains all of the analyzer crystals and corresponding emitted energy ranges that are currently available at PIPOX...
Beamline 101 Basics of running an experiment Preparing Samples How samples must be prepared depends on the type of measurement being performed, with transmissi...
Beamline Configuration Undulator White beam slits Monochromator : Si(111) or Si(311) Upstream ADC slits not currently in use I0 ion chamber measure of flux...
Uniblitz Fast Shutter (25 mm) The fast shutter at 2A is located just downstream of I0 (i.e. upstream of all in hutch optics) and is used to limit the beam exposur...
Help! There's no beam! If you are not finding any signal from your sample, here is a checklist of things to track down where the problem could be. Is there beam ...
Larch at ID2A The Larch software package is available on the PIPOXS station computer and may be used to process and analyze XAS data. Larch is something of a spir...
Motor Names New as of fall 2023: motor_help and motor_info macros developed by Kieth which can print useful information about a motor without having to dive into ...
Sample Positioning XAS Experiments For XAS measurements, the sample is mounted on an x/z stage, allowing movement up / down (z) and transverse to the beam (x). T...
Common Sample Cells and Environments at ID2A Standard Sample Cells While PIPOXS is a flexible endstation capable of accommodating a wide variety of sample cells ...
Preparing Samples Sample preparation will depend on the specific details of your materials, the experiment you're conducting, and the conditions you require, so a...
Scripts for ID2A I've put together a number of python scripts for generating scans and processing data from ID2A. These scripts are available on the station compu...
Webcams PIPOXS is equipped with two separate cameras for remote viewing of the hutch / sample: a controllable pan tilt zoom (PTZ) camera and a fixed, static camer...