Due to the accuracy required to successfully use the Sample Holder, please have the Sample Holder printed professionally. -Here is the design file download for the sample holder: SampleHolder_UTK_R2.STL -Here is the design file download for the calibration/standards sample holder: CalibrationStandards_UTK_R1.STL
Print sample holder or have one shipped to you: contact Louisa Smieska or Arthur Woll regarding shipping.
How to mount samples:
Use Kapton film and double-sided tape to affix your samples to the Sample Holder.
Gel Samples
For gel samples: -Place a 3" x 4" sheet of Kapton film along the back side of the Sample Holder and affix the film to the holder with tape. -Place your samples individually in the numbered wells. -Place a 3" x 4" Kapton film over the front of the Sample Holder and affix with tape.
Powder Samples
For powder samples: -Prepare the powder sample in a 5/16" washer and place the washer in the appropriate sample holder well.
Solid Samples
For solid samples: -Place samples in the recessed areas across the wells and place tape across the sides to hold the sample in place.